Table-Top Laminar Flow

OVERVIEW  |  E-SERIES VERTICAL FLOW  |  E-SERIES HORIZONTAL FLOW
TABLE-TOP LAMINAR FLOW  |  C-FRAME WORKSTATION  |  CUSTOM SERIES
TABLES  |  OPTIONS FOR CLEAN BENCHES & WORKSTATIONS

General Information
A self contained SAM Fan Filter Unit provides Class 100 HEPA filtered air in a vertical laminar flow pattern within the workspace.

Electrical
Standard voltage is 115 volts with other voltage options shown on a following page. An On/Off switch is installed on the SAM unit. All 115 volt models are equipped with a 8 foot power cord and 3 – prong plug. Other voltages require electrical connection to the power source by a qualified electrician.

Final Filter
HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized  aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option.

Prefilter
A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard.

Speed Control
A solid state variable speed control is mounted on the SAM unit.

Grille
Table Top Laminar Flow Workstations with lights have an acrylic grille inserted in an anodized aluminum frame which is hinged to open. This permits access to the fluorescent light tubes and removal of the HEPA filter without removing the
SAM unit from the frame. Workstations without lights have a painted white epoxy diamond pattern grille.

Construction
Table Top Laminar Flow Workstation frames are white painted steel tubing with clear acrylic side and back panels and adjustable leg levelers. Workstations are designed to be placed on a table or other suitable work surface.

Lighting
All 2’, 4’, & 8’ laminar flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. The 6’ laminar flow models are equipped with a 2-lamp fixture, 120V, 60 hz., T12 ballast and two (2) high output lamps. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment.

Shipping
Workstations are fully assembled with the SAM unit packaged separately for safe shipping.  The self contained SAM unit is easily installed in the frame on site with no special tools required.

See a following page for options and ordering information.

Ordering Information
Table Top Laminar Flow Work Stations w/Lights
Model No. Voltage Nominal Overall Dimensions Opening Size Weight
13100 115V 2Ft. 26″L x 26″D x 47.25″H 24″L x 30″H 175 lbs.
13101 115V 4Ft. 50″L x 26″D x 47.25″H 48″L x 30″H 250 lbs.
13102 115V 6Ft. 74″L x 26″D x 47.25″H 72″L x 30″H 300 lbs.
13103 115V 8Ft. 98″L x 26″D x 47.25″H 96″L x 30″H 325 lbs.

NOTE: Fluorescent light tubes not included

Options
208-230V, 50/60hz motor Custom sizes and designs
277V, 60 hz motor ULPA Filter 99.9995% eff. @ 0.12 micron or larger

Refer to following pages for more options

[Click here for a PDF of this content.]