SAM® 24 H.O. High-Output

Special Series:
UNDERSIZED SAM 24 MICROSOUND  |  SAM MICROSOUND STAINLESS STEEL
SAM HAZARDOUS LOCATION  |  SAM RSRM  |  SAM RF REVERSE FLOW
SAM 44 GS  |  SAM 24 H.O. HIGH-OUTPUT  |  SAM 26 SERIES  |  SAM CUSTOMLINE

Options:
SAMLINK CONTROL SYSTEMS  |  CONSTANT VELOCITY  |  MAGNEHELIC GAGES
CEILING COLLARS & SHEET ROCK ADAPTERS  |  DUCT COLLAR ADAPTER
FINAL FILTERS  |  GRILLES & KNIFE EDGE  |  PILOT LIGHT, POWER CORD & PREFILTER
ROOMSIDE SPEED CONTROL, AEROSOL PORT & STATIC CONTROL

Return to SAM OVERVIEW Page


445_SAM24_HO_Models1Delivers Up To 1,000 CFM

SAM 24 H.O. Series Fan Filter Units are ideal for cleanroom applications with high ceilings.

SAM 24 H.O. Fan Filter Units are designed to deliver from 1000-1200 CFM, and include a 100mm 99.99% efficient HEPA filter, 2” prefilter, seismic clip suspension points, solid state variable speed control with RFI suppression, and a safety switch.

Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points.

The energy efficient N310 motor blower is a low watt, backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 (60 Hz).

The HEPA 100mm final filter is protected with a white epoxy diamond pattern grille and is tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST)  and or ISO standards.

CRF units feature a polystyrene eggcrate grille in an anodized aluminum frame hinged to open, permitting removal of the HEPA or ULPA filter without removing the unit from the ceiling.

Popular options include an 8’ power cord (115 Volt only), 99.9995% eff. ULPA grade final filter, UL 900 filters and duct collar adapters. Refer to the back of this section for more options and accessories.

Consult with one of our cleanroom experts in your area, or call the factory for more information.

SAM is a registered trademark owned by Clean Rooms International.


CRF Style Filter Data: Size: 20-5/8” x 44-5/8” x 6” with anodized aluminum frame and diamond pattern white epoxy face screen. The HEPA Filter with 100mm media is designed for 145 FPM average face velocity @ initial 0.40 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger. An access port with removable plug is located in the center of the filter element face and is used for introducing an upstream challenge or measuring static pressure.

NCR Style Filter Data: Size: 23-5/8” x 47-5/8” x 6” with  exposed anodized aluminum frame and diamond pattern white epoxy face screen. The HEPA Filter with 100mm media is designed for 145 FPM average face velocity @ initial 0.40 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.

Standard Equipment: Includes a N310 Low Watt motor, prefilter and a solid state variable speed control with RFI Suppression. A safety switch is provided for all voltages as listed below.

Options:  ULPA Filter, Power Cord, Duct Collar Adaptors.  More options are shown in the back of this section.

Ordering Information
Mfg. Code Model or Description Style Size Motor Voltage Hz Watts FLA Weight
12500 SAM24 H. O. NCR 2×4 N310 115 60 185 1.6 90 lbs. (40.8 kg.)
12501 SAM24 H. O. NCR 2×4 N310 208-230 50/60 165 .8-.7 90 lbs. (40.8 kg.)
12502 SAM24 H. O. NCR 2×4 N310 277 60 165 0.6 90 lbs. (40.8 kg.)
12503 SAM24 H. O. CRF CRF 2×4 N310 115 60 185 1.6 110 lbs. (49.9 kg.)
12504 SAM24 H. O. CRF CRF 2×4 N310 208-230 50/60 165 .8-.7 110 lbs. (49.9 kg.)
12506 SAM24 H. O. CRF CRF 2×4 N310 277 60 165 0.6 110 lbs. (49.9 kg.)
Replacement Filters
Mfg. Code Description
302027 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron
302028 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302029 CRF Style HEPA Filter, 99.99% eff. @ 0.3 micron
_ CRF Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302197 Prefilter 20″x20″x2″, 30% ASHRAE efficient, pleated type

Note: Consult with the factory for horizontal flow applications

[Click here for a PDF of this content.]