SAM® 26 Series

Special Series:
UNDERSIZED SAM 24 MICROSOUND  |  SAM MICROSOUND STAINLESS STEEL
SAM HAZARDOUS LOCATION  |  SAM RSRM  |  SAM RF REVERSE FLOW
SAM 44 GS  |  SAM 24 H.O. HIGH-OUTPUT  |  SAM 26 SERIES  |  SAM CUSTOMLINE

Options:
SAMLINK CONTROL SYSTEMS  |  CONSTANT VELOCITY  |  MAGNEHELIC GAGES
CEILING COLLARS & SHEET ROCK ADAPTERS  |  DUCT COLLAR ADAPTER
FINAL FILTERS  |  GRILLES & KNIFE EDGE  |  PILOT LIGHT, POWER CORD & PREFILTER
ROOMSIDE SPEED CONTROL, AEROSOL PORT & STATIC CONTROL

Return to SAM OVERVIEW Page


447_SAM26_Models1SAM
26 Units are Ideal for Workstations and Special Applications

SAM 26 Series Fan Filter Units are ideal for supplying clean air to workstations, equipment or for special size ceiling spaces.

SAM 26 series units include a 99.99% efficient HEPA filter, prefilter, seismic clip suspension points and solid state variable speed control with RFI suppression. Housings are fabricated from 20 gauge steel with white powdercoat finish.

SAM 26 units are equipped with two (2) N310 low watt backward curved impeller, 60 hz, single phase, permanent split capacitor type motor blower assemblies with thermal overload protection. Standard voltages are 115 volt (60 hz), 208-230 volt (50/60 hz) and 277 volt (60 hz).

Final filters are protected with a white epoxy diamond grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards.

SAM 26 Series CRF units feature a polystyrene eggcrate grille in an anodized aluminum frame hinged to open, permitting removal of the HEPA or ULPA filter without removing the unit from the ceiling.

SAM 26 CRF LI units feature an integral 2-lamp high output light fixture located inside the filter housing below the final HEPA filter. The lights are automatically on when the unit is operating and the ballast is located on top of the unit for easy change out.  An acrylic eggcrate grille in an anodized aluminum frame is hinged to open, permitting removal of the HEPA or ULPA filter and fluorescent lamp tubes.

Additional options and accessories are shown in the back of this section. Consult with one of our cleanroom experts in your area, or call the factory for more information.

SAM is a registered trademark owned by Clean Rooms International.


Ordering Information
Mfg. Code Model or Description Size Voltage Motor Hz Watts Weight
12603 SAM26 CRF 2×6 115 N310 60 370 140 lbs. (64 kg.)
12604 SAM26 CRF 2×6 208-230 N310 50/60 340 140 lbs. (64 kg.)
12605 SAM26 CRF 2×6 277 N310 60 330 140 lbs. (64 kg.)

Note: Consult with the factory for horizontal flow applications

Ordering Information
Mfg. Code Model or Description Size Voltage Motor Hz Watts Weight
12606 SAM26 CRF w/2-Lamps 2×6 115 N310 60 370 150 lbs. (68 kg.)
12607 SAM26 CRF w/2-Lamps 2×6 208-230 N310 50/60 340 150 lbs. (68 kg.)
12608 SAM26 CRF w/2-Lamps 2×6 277 N310 60 330 150 lbs. (68 kg.)

Note: Consult with the factory for horizontal flow applications


CRF-Style Filter Data: The HEPA Filter is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.

An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters are replaceable from roomside.

Access Port: This port is located in the center of the filter element face and is used for introducing an upstream challenge or measuring static pressure.

Replacement Filters
Mfg. Code Description
302130 CRF Style HEPA Filter, 99.99% eff. @ 0.3 micron
302131 CRF Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302190 Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type

Ordering Information
Mfg. Code Model or Description Size Voltage Motor Hz Watts Weight
12600 SAM26 MS 2×6 115 N310 60 370 118 lbs. (54 kg.)
12601 SAM26 MS 2×6 208-230 N310 50/60 340 118 lbs. (54 kg.)
12602 SAM26 MS 2×6 277 N310 60 330 118 lbs. (54 kg.)

Note: Consult with the factory for horizontal flow applications

Replacement Filters
Mfg. Code Description
302120 NCR Style HEPA Filter, 99.99% eff. @ 0.3 micron
302125 NCR Style ULPA Filter, 99.9995% eff. @ 0.12 micron
302190 Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type

NCR-Style Filter Data: The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.

Final filters can be replaced by removing unit from ceiling or workstation, placing on a bench, removing and replacing the filter and re-installing complete unit.


[Click here for a PDF of this content.]