2″ Gel Seal T-Grid Systems

T-Grid Options:
OVERVIEW  |  2″ HEAVY-DUTY GASKET SEAL
2″ HEAVY-DUTY GASKET SEAL SLOTTED  |  2″ WALKABLE T-GRID  |  2″ GEL SEAL
2″ T-GRID SUSPENSION HARDWARE  |  1.5″ GASKET SEAL

Ceiling Systems Components:
LIGHT FIXTURES  |  LED LIGHT FIXTURES  |  FLOW-THRU TROFFERS  |  TEARDROP LIGHTING
CLEANGUARD CEILING PANELS

2 inch gel sealEasy-To-Install Dead Level Superior Load-Bearing Capability

Our Gel-Seal T-Grid is a state-of-the-art system offering significant advantages for maintaining tight-tolerances in higher class cleanroom environments. The gel forms a secure, airtight barrier against dust and moisture for sensitive cleanroom requirements.

Clean Rooms International’s suspension hardware for 2” Heavy Duty T-Grid Systems is designed and manufactured to meet the exacting standards of the cleanroom industry.

Gasket and Gel Seal Style suspension hardware is interchangeable and includes a series of intersection connectors and turnbuckles for suspending the T-Grid System from the building structure.

Sprinkler Penetration Sleeves, Ionization Emitters and seismic sway control can be incorporated into the system.

Consult with our factory for more information.

cleanroom t-grid ceiling gel seals

• White Powder-Coat Finish

Gel Seal Style T-Grid Parts for 2″ T-bar
Part No. Description Length Web Depth Notch Spacing Notched Sides Flange Width Weight Per LF Pieces Per Carton Linear Feet Per carton
147504 Main T 12′ 1 3/8″ 24″ o.c. 2 2″ 0.85 lb. 12 144
147506 Cross T 4′ 1 3/8″ N/A N/A 2″ 0.85 lb. 12 48
147507 Cross T 2′ 1 3/8″ N/A N/A 2″ 0.85 lb. 12 24
147503 Perimeter T 12′ 1 3/8″ 48″ o.c. 1 2″ 0.85 lb. 12 144
147505 Perimeter T 12′ 1 3/8″ 24″ o.c. 1 2″ 0.85 lb. 144

Urethane Gel: Call the factory for specific information.

Load Specifications for Gel Seal Style T-Grid System
Deflection Formula L/360 L/180 L/360
Hanger Spacing (Span) 48″ 48″ 48″
Main Tee Spacing 48″ 48″ 48″
Maximum Point Load (LBS.) 296 414 629
Maximum Uniform Load (LBS./SF) 74 78.5 314.5
Applied Load (LBS./SF) 18.5 19.6 78.6
Deflection at mid-span 1/8″ 1/4″ 1/16″

Hardware is Interchangeable
Gasket and Gel Seal Style suspension hardware is interchangeable and includes a series of intersection connectors and turnbuckles for suspending the T-Grid System from the building structure.

Superior Load Bearing Capacity
Connectors are designed to accommodate standard 2’ x 4’ openings as well as unusual configurations. The zinc castings are designed with an integral 3/8” x 3/4” high threaded tower providing a strong load bearing capability. The tower accepts our 3/8” #148038 Right Hand/Left Hand stud which is connected to a #148039 threaded turnbuckle. A preferred method of suspension from the building structure is all-thread rod attached to the turnbuckles as illustrated.

Seismic Zone Applications
For applications in seismic zones, the all-thread rod serves as a compression strut . Seismic sway is controlled by attaching splay wires to eye bolts secured to the Intersection Connectors.

Local seismic codes vary. We recommend consulting with local authorities for clarification.

Perimeter Zee
Our exclusive Perimeter Zee serves as a closure trim piece between the wall and adjacent T-Bar, resulting in  properly sized openings for installing SAM units, lights or metal ceiling panels.

NOTE: Same for Gasket and Gel Seal Style T-Bar

 

[Click here for a PDF of this content.]