2″ T-Grid Suspension Hardware

T-Grid Options:
OVERVIEW  |  2″ HEAVY-DUTY GASKET SEAL
2″ HEAVY-DUTY GASKET SEAL SLOTTED  |  2″ WALKABLE T-GRID  |  2″ GEL SEAL
2″ T-GRID SUSPENSION HARDWARE  |  1.5″ GASKET SEAL

Ceiling Systems Components:
LIGHT FIXTURES  |  LED LIGHT FIXTURES  |  FLOW-THRU TROFFERS  |  TEARDROP LIGHTING
CLEANGUARD CEILING PANELS

Designed for Clean Rooms
Clean Rooms International’s suspension hardware for 2” Heavy Duty T-Grid Systems is designed and manufactured to meet the exacting standards of the cleanroom industry.

Hardware is Interchangeable
Gasket and Gel Seal Style suspension hardware is interchangeable and includes a series of intersection connectors and turnbuckles for suspending the T-Grid System from the building structure.

Strong Load Bearing Capacity
Connectors are designed to accommodate standard 2’ x 4’ openings and other unusual configurations. The zinc castings are designed with an integral 3/8” x 3/4” high threaded tower providing a strong load bearing capability. The tower accepts our 3/8” #148038 Right Hand/Left Hand 8” stud which is connected to a #148039 threaded turnbuckle. A preferred method of suspension from the building structure is all-thread rod attached to the turnbuckles as illustrated.

Seismic Zone Applications
Sprinkler Penetration Sleeves, Ionization Emitters and seismic sway control can be incorporated into the system. For applications in seismic zones, the all-thread rod serves as a compression strut and splay wires can be attached to eye bolts secured to the Intersection Connectors.

Local seismic codes vary. We recommend consulting with local authorities for clarification.


More Gasket-Style Suspension Hardware:

Ordering Information for:
Intersection Connector Castings, Screws and Gasketing
Part Number Description No. of Screws Weight Requirement
148038
148039
8″ RH/LH Rod
Turnbuckle

0.20
0.40
1 per 16 sq. ft.
1 per 16 sq. ft.
148041
148040
Inside Corner Connector
Outside Corner Connector
4
4
0.20
0.20
1 per corner
1 per corner
148043
148044
Perimeter Intersection Connector
Special 3-way Connector
6
6
0.12
0.12
1 per main tee or cross tee
intersecting at the perimeter
148042 4-Way Intersection Connector 8 0.40 1 per intersection
148045
148023
148046
Main T Splice Connector
Wall Angle Mounting Brackets
Wall Angle Splice Connectors
4
4
4
0.10
0.10
0.12
1 per main tee
3 per 12′ length
1 per wall angle
211639       1/4-20 Phillips Pan Hd Screw
603320 Gasket 3/16 x 3/8 x 50′ roll

NOTE: Same for Gasket and Gel Seal Style T-Bar

[Click here for a PDF of this content.]