Technical Drawings
Technical Drawings
SAM® MS SS 2 x 2 NCR
SAM® MS SS 2 x 4 NCR
SAM® MS GS SS 2 x 2 GS
SAM® MS GS SS 2 x 4 GS
SAM® Units & Accessories / Special series
GS Style Filter Data (2′ x 2′ Units)
Size: 20-5/8” x 20-5/8” x 3” with anodized aluminum frame, upstream gel channel and diamond pattern white epoxy face screen. The HEPA is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
GS Style Filter Data (2′ x 4′ Units)
Size: 20-5/8” x 44-5/8” x 3” with anodized aluminum frame, upstream gel channel and diamond pattern white epoxy face screen. The HEPA is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
NCR Style Filter Data (2′ x 2′ Units)
Size: 23-5/8” x 23-5/8” x 3” with exposed stainless steel frame. The HEPA is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
NCR Style Filter Data (2′ x 4′ Units)
Size: 23-5/8” x 47-5/8” x 3” with exposed stainless steel frame. The HEPA is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
Stainless Steel SAM MicroSound Series Fan Filter Units feature housings fabricated from #304 stainless steel with #4 brushed finish.
SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned.
The blower is a 115 volt low watt AC backward curved impeller, 60hz, single phase, permanent split capacitor type motor blower assembly with thermal overload protection.
Other motor and voltage options are 208-230 (50/60 hz) and 277 (60 hz).
NCR Style final filters feature a stainless steel frame and are protected with a stainless steel round perforated grille on the downstream side.
SAM GS Fan Filter Units feature a HEPA or ULPA filter replaceable from roomside. Final filters inside the housing are standard GS style with anodized aluminum frame and upstream gel channel.
A round perforated stainless steel grille and frame assembly is attached with four (4) screws. Removing the grille permits replacing the HEPA or ULPA final filter without removing the unit from the ceiling.
All final filters are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards.
Actual sizes
SAM is a registered trademark owned by Clean Rooms International.
SAM® MS SS 2 x 2 NCR
SAM® MS SS 2 x 4 NCR
SAM® MS GS SS 2 x 2 GS
SAM® MS GS SS 2 x 4 GS
Mfg. code
Model or Description
Style
Size
Voltage
Motor
Variable Speed Control
HEPA filter
Weight
12106*
SAM22 MS SS
NCR
2×2
115
N310
703084
302052
52 lbs. (23.6 kg.)
12108
SAM22 MS SS
NCR
2×2
208-230
N310
703912
302052
52 lbs. (23.6 kg.)
12109*
SAM22 MS SS
NCR
2×2
277
N310
703915
302052
52 lbs. (23.6 kg.)
12270*
SAM24 MS SS
NCR
2×4
115
N310
703084
302053
75 lbs. (34 kg.)
12271
SAM24 MS SS
NCR
2×4
208-230
N310
703912
302053
75 lbs. (34 kg.)
12272*
SAM24 MS SS
NCR
2×4
277
N310
703915
302053
75 lbs. (34 kg.)
12110*
SAM22 MS GS SS
GS
2×2
115
N310
703084
302201
70 lbs. (31.8 kg.)
12112
SAM22 MS GS SS
GS
2×2
208-230
N310
703912
302201
70 lbs. (31.8 kg.)
12113*
SAM22 MS GS SS
GS
2×2
277
N310
703915
302201
70 lbs. (31.8 kg.)
12273*
SAM24 MS GS SS
GS
2×4
115
N310
703084
302200
100 lbs. (45.4 kg.)
12274
SAM24 MS GS SS
GS
2×4
208-230
N310
703912
302200
100 lbs. (45.4 kg.)
12275*
SAM24 MS GS SS
GS
2×4
277
N310
703915
302200
100 lbs. (45.4 kg.)
* UL Listed
Motor
Voltage
Hz
Watts
Running amps
N310
115
60
185
1.5
N310
208-230
50/60
172
0.75*
N310
277
60
172
0.76
*Running amps will be less on 50Hz
**Line voltage can affect actual start-up amperage
Mfg. code
Model or Description
302201
2 x 2 GS Style HEPA Filter, 99.99% efficient @ 0.3 micron
302204
2 x 2 GS Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302200
2 x 4 GS Style HEPA Filter, 99.99% efficient @ 0.3 micron
302203
2 x 4 GS Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302052
2 x 2 NCR Style HEPA Filter, 99.99% efficient @ 0.3 micron
302053
2 x 4 NCR Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302190
Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type
Note: Consult with the factory for horizontal flow applications
Contact us
Toll-free: 877–380–1860
Phone: 616–452–8700
Fax: 616–452–2372
Email: sales@cleanroomsint.com
Terms and conditions
©2021 Clean Rooms International, Inc
