Table Top Flow

Clean Benches

Table Top Flow

Table Top Flow

Key Features

  • A self contained SAM Fan Filter Unit provides ISO 5 HEPA filtered air in a vertical flow pattern within the workspace.


Standard voltage is 115 volts with other voltage options shown on a following page. An On/Off switch is installed on the SAM unit. All 115 volt models are equipped with a 8 foot power cord and 3 – prong plug. Other voltages require electrical connection to the power source by a qualified electrician.

Final Filter

HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option.


A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard.

Speed Control

A solid state variable speed control is mounted on the SAM unit.


Table Top Flow Workstations with lights have an acrylic grille inserted in an anodized aluminum frame which is hinged to open. This permits access to the fluorescent light tubes and removal of the HEPA filter without removing the SAM unit from the frame. Workstations without lights have a painted white epoxy diamond pattern grille.


Table Top Flow Workstation frames are white powder coated steel tubing with clear acrylic side and back panels and adjustable leg levelers. Workstations are designed to be placed on a table or other suitable work surface.


All 2’, 4’, & 8’ flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. The 6’ flow models are equipped with a 2-lamp fixture, 120V, 60 hz., T12 ballast and two (2) high output lamps. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment.


Workstations are fully assembled with the SAM unit packaged separately for safe shipping. The self contained SAM unit is easily installed in the frame on site with no special tools required.

Technical Drawings

Technical Drawings

Ordering Information

Model No.



Overall Dimensions

Opening Size


(Table Top Laminar Flow Work Stations w/Lights)



2 Ft.

26″L x 26″D x 47.25″H

24″L x 30″H

175 lbs.



4 Ft.

50″L x 26″D x 47.25″H

48″L x 30″H

250 lbs.



6 Ft.

74″L x 26″D x 47.25″H

72″L x 30″H

300 lbs.



8 Ft.

98″L x 26″D x 47.25″H

96″L x 30″H

325 lbs.


NOTE: Fluorescent light tubes not included



208-230V, 50/60hz motor

Custom sizes and designs

277V, 60 hz motor

ULPA Filter 99.9995% efficiency MPPS

Clean Rooms International, Inc

4939 Starr St SE
Grand Rapids, MI 49546

Terms and conditions

Contact us

Toll-free: 877–380–1860

Phone: 616–452–8700

Fax: 616–452–2372


Terms and conditions

©2021 Clean Rooms International, Inc