Technical Drawings
Technical Drawings
8’ x 8’ Softwall Clean Room
GS Style
NCR Style
Filter Clamp Detail
Exploded View
SAM® Units & Accessories / Special series
GS Style Filter Data
Size: 20-5/8” x 44-5/8” x 3” with anodized aluminum frame, upstream gel channel and diamond pattern white epoxy face screen. The HEPA is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
NCR Style Filter Data
Size: 23-5/8” x 47-5/8” x 3” with exposed anodized aluminum frame and diamond pattern white epoxy face screen. The HEPA Filter is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
Motor Data
SAM Haz Loc Units are equipped with an AMCA – B rated blower and Class 1 Group D, Class 2 Groups F & G motor.
SAM Haz Loc (Hazardous Location) Units are ideal for supplying clean air to workstations or equipmentin a location where ambient air is contaminated with chemical or other hazardous conditions.
Units include a 99.99% efficient HEPA filter, prefilter, spark resistant aluminum blower wheel and electrical parts with explosion proof ratings (AMCA Type B Construction).
Housings are fabricated from steel with a white powdercoat finish. If necessary eyebolts can be field installed in the weld nuts located at all corners for suspending the unit.
Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 (60 Hz), single phase and 208/460, 3 phase.
HEPA or ULPA 99.9995% efficient @ 0.12 micron final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and or ISO standards.
GS Style Units feature an anodized aluminum perforated grille with round holes hinged to open, permitting removal of the HEPA or ULPA filter without removing the unit from the ceiling.
Consult with one of our cleanroom experts in your area, or call the factory for more information.
CAUTION
It is always the responsibility of the customer to determine “Fitness-of-Use” of this product for the application. Clean Rooms International Inc. can not and will not make any recommendations for use of this product and will not be held liable or responsible for conditions and installations beyond our control. If you are unsure of your Hazardous Location requirement, it is advised that you contact your local Fire Marshall, OSHA, local Building Inspector or an Indoor Environmental test agency to help determine your needs.
8’ x 8’ Softwall Clean Room
GS Style
NCR Style
Filter Clamp Detail
Exploded View
Mfg. Code
Model or Description
Style
Size
Motor
Voltage
Hz
12950*
SAM24 Haz Loc
NCR
2×4
Class 1 Group D, Class 2 Group F & G
115
60
12951
SAM24 Haz Loc
NCR
2×4
Class 1 Group D, Class 2 Group F & G
208-230
60
12952*
SAM24 Haz Loc
NCR
2×4
Class 1 Group D, Class 2 Group F & G
277
60
12953
SAM24 Haz Loc
NCR
2×4
Class 1 Group D, Class 2 Group F & G
208-460
60
12954
SAM24 GS Haz Loc
GS
2×4
Class 1 Group D, Class 2 Group F & G
115
60
12955
SAM24 GS Haz Loc
GS
2×4
Class 1 Group D, Class 2 Group F & G
208-230
60
12956
SAM24 GS Haz Loc
GS
2×4
Class 1 Group D, Class 2 Group F & G
277
60
12957
SAM24 GS Haz Loc
GS
2×4
Class 1 Group D, Class 2 Group F & G
208-460
60
Mfg. code
Model or Description
302090
NCR Style HEPA Filter, 99.99% efficient @ 0.3 micron
302100
NCR Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302200
GS Style HEPA Filter, 99.99% efficient @ 0.3 micron
302203
GS Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302190
Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type
Contact us
Toll-free: 877–380–1860
Phone: 616–452–8700
Fax: 616–452–2372
Email: sales@cleanroomsint.com
Terms and conditions
©2021 Clean Rooms International, Inc
