SAM® Units & Accessories / Special series
NCR Style Filter Data
The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.
Final filters can be replaced by removing unit from ceiling or workstation, placing on a bench, removing and replacing the filter and re-installing complete unit.
CRF Style Filter Data
The HEPA Filter is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.
An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters are replaceable from roomside.
SAM 26 Series Fan Filter Units are ideal for supplying clean air to workstations, equipment or for special size ceiling spaces.
SAM 26 series units include a 99.99% efficient HEPA filter, prefilter, seismic clip suspension points and solid state variable speed control with RFI suppression. Housings are fabricated from 20 gauge steel with white powdercoat finish.
SAM 26 units are equipped with two (2) N310 low watt backward curved impeller, 60 hz, single phase, permanent split capacitor type motor blower assemblies with thermal overload protection. Standard voltages are 115 volt (60 hz), 208-230 volt (50/60 hz) and 277 volt (60 hz).
Final filters are protected with a white epoxy diamond grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards.
SAM 26 Series CRF units feature a polystyrene eggcrate grille in an anodized aluminum frame hinged to open, permitting removal of the HEPA or ULPA filter without removing the unit from the ceiling.
SAM 26 CRF LI units feature an integral 2-lamp high output light fixture located inside the filter housing below the final HEPA filter.
The lights are automatically on when the unit is operating and the ballast is located on top of the unit for easy change out. An acrylic eggcrate grille in an anodized aluminum frame is hinged to open, permitting removal of the HEPA or ULPA filter and fluorescent lamp tubes.
Additional options and accessories are shown in the back of this section. Consult with one of our cleanroom experts in your area, or call the factory for more information.
SAM is a registered trademark owned by Clean Rooms International Inc.
SAM® 26 CRF
SAM® 26 CRF Filter Clamp Detail
SAM® 26 CRF LI
SAM® 26 CRF LI Filter Clamp Detail
SAM® 26 NCR Style
Switch Detail
Popular Applications for SAM® 26 Units
Mfg. Code
Model or Description
Size
Voltage
Motor
Hz
Watts
Weight
12603
SAM26 CRF
2×6
115
N310
60
370
140 lbs. (64 kg.)
12604
SAM26 CRF
2×6
208-230
N310
50/60
344
140 lbs. (64 kg.)
12605
SAM26 CRF
2×6
277
N310
60
344
140 lbs. (64 kg.)
Note: Consult with the factory for horizontal flow applications
Mfg. Code
Model or Description
Size
Voltage
Motor
Hz
Watts
Weight
12606
SAM26 CRF w/2-Lamps
2×6
115
N310
60
370
150 lbs. (68 kg.)
12607
SAM26 CRF w/2-Lamps
2×6
208-230
N310
50/60
344
150 lbs. (68 kg.)
12608
SAM26 CRF w/2-Lamps
2×6
277
N310
60
344
150 lbs. (68 kg.)
Note: Consult with the factory for horizontal flow applications
Mfg. code
Model or Description
302130
CRF Style HEPA Filter, 99.99% efficient @ 0.3 micron
302131
CRF Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302190
Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type
Mfg. Code
Model or Description
Size
Voltage
Motor
Hz
Watts
Weight
12600
SAM26 MS
2×6
115
N310
60
370
118 lbs. (54 kg.)
12601
SAM26 MS
2×6
208-230
N310
50/60
340
118 lbs. (54 kg.)
12602
SAM26 MS
2×6
277
N310
60
330
118 lbs. (54 kg.)
Note: Consult with the factory for horizontal flow applications
Mfg. code
Model or Description
302120
NCR Style HEPA Filter, 99.99% efficient @ 0.3 micron
302125
NCR Style ULPA Filter, 99.9995% efficient @ 0.12 micron
302190
Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type
Contact us
Toll-free: 877–380–1860
Phone: 616–452–8700
Fax: 616–452–2372
Email: sales@cleanroomsint.com
Terms and conditions
©2021 Clean Rooms International, Inc
