NOTE: Fluorescent light tubes not included
Technical Drawings
Technical Drawings
Horizontal or Vertical Flow
Electrical
Standard voltage is 115 volts with other voltage options shown on a following page. A common On/Off switch is mounted on the SAM unit that controls both the fan and the lights. All 115 volt models are equipped with a 8 foot power cord and 3 – prong plug. Other voltages require electrical connection to the power source by a qualified electrician.
Final Filter
HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option.
Prefilter
A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard.
Speed Control
A solid state variable speed control is mounted on the SAM unit.
Grille
Vertical flow clean benches with lights have an acrylic grille inserted in an anodized aluminum frame which is hinged to open. This permits access to the fluorescent light tubes and removal of the HEPA filter without removing the SAM unit from the frame. Vertical flow clean benches without lights have a painted white epoxy diamond pattern grille.
Construction
Clean Bench frames are white painted steel tubing with clear acrylic side and back panels and adjustable leg levelers. Work surfaces are solid core with white high pressure laminate finish. Perforated and stainless steel work surfaces are available as options. Clean Bench models are available in a sit-down style with work surface 30” from floor or stand-up style with work surface 40” from floor.
Lighting
All 2’, 4’, & 8’ vertical flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. The 6’ vertical flow models are equipped with a 2-lamp fixture, 120V, 60 hz., T12 ballast and two (2) high output lamps. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment.
Shipping
Vertical Flow Clean Benches are fully assembled with the SAM unit packaged separately for safe shipping. The self contained SAM unit is easily installed in the frame on site with no special tools required.
Options
See a following page for options and ordering information.
Model No.
Nominal
Work Surface
Overall Dim.
Opening Size
Voltage
(Sit-down Style Vertical Flow and Work Surface 30” from Floor w/ Lights)
13200
2 Ft.
24″ x 25″
26”L x 26”D x 78”H
24”L x 30”H
115V
13201
4 Ft.
48″ x 25″
50”L x 26”D x 78”H
48”L x 30”H
115V
13202
4 Ft.
48″ x 32″
50”L x 33”D x 78”H
48”L x 30”H
115V
13203
6 Ft.
72″ x 25″
74”L x 26”D x 78”H
72”L x 30”H
115V
13204
6 Ft.
72″ x 32″
74”L x 33”D x 78”H
72”L x 30”H
115V
13205
8 Ft.
96″ x 25″
98”L x 26”D x 78”H
96”L x 30”H
115V
13206
8 Ft.
96″ x 25″
98”L x 33”D x 78”H
96”L x 30”H
115V
(Stand-up Style Vertical Flow and Work Surface 40” from Floor w/ Lights)
13257
2 Ft.
24″ x 25″
26”L x 26”D x 88”H
24”L x 30”H
115V
13207
4 Ft.
48″ x 25″
50”L x 26”D x 88”H
48”L x 30”H
115V
13208
4 Ft.
48″ x 32″
50”L x 33”D x 88”H
48”L x 30”H
115V
13209
6 Ft.
72″ x 25″
74”L x 26”D x 88”H
72”L x 30”H
115V
13210
6 Ft.
72″ x 32″
74”L x 33”D x 88”H
72”L x 30”H
115V
13211
8 Ft.
96″ x 25″
98”L x 26”D x 88”H
96”L x 30”H
115V
13212
8 Ft.
96″ x 32″
98”L x 33”D x 88”H
96”L x 30”H
115V
NOTE: Fluorescent light tubes not included
Description
208-230V, 50/60 hz motor
Casters with brakes
Black Acrylic side & back panels
277V, 60 hz motor
Duplex electrical outlets
Painted steel side & backpanels
250V, 50 hz lighting for export models
Front Face Shields
Stainless steel work surface
Duct Collar Adaptor, 10” or 12” diameter
Magnehelic Gauge
Static Control Package
ULPA Filter 99.9995% efficiency MPPS or larger
Perforated Work Surface
Separate switch for fan & lights
Contact us
Toll-free: 877–380–1860
Phone: 616–452–8700
Fax: 616–452–2372
Email: sales@cleanroomsint.com
Terms and conditions
©2021 Clean Rooms International, Inc
