CleanRooms InternationalCleanRooms International

General Information
A self contained SAM Fan Filter Unit provides Class 100 HEPA filtered air in a vertical laminar flow pattern within the workspace.

Electrical
Standard voltage is 115 volts with other voltage options shown on a following page. A common On/Off switch is mounted on the SAM unit that controls both the fan and the lights. All 115 volt models are equipped with a 8 foot power cord and 3 – prong plug. Other voltages require electrical connection to the power source by a qualified electrician.

Final Filter
HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized  aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option.

Prefilter
A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard.

Speed Control
A solid state variable speed control is mounted on the SAM unit.

Grille
Vertical flow clean benches with lights have an acrylic grille inserted in an anodized aluminum frame which is hinged to open. This permits access to the fluorescent light tubes and removal of the HEPA filter without removing the SAM unit from the frame. Vertical flow clean benches without lights have a painted white epoxy diamond pattern grille.

Construction
Clean Bench frames are white painted steel tubing with clear acrylic side and back panels and adjustable leg levelers. Work surfaces are solid core with white high pressure laminate finish.  ESD, perforated and stainless steel work surfaces are available as options. Clean Bench models are available in a sit-down style with work surface 30” from floor or stand-up style with work surface 40” from floor.

Lighting
All 2’, 4’, & 8’ vertical flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. The 6’ vertical flow models are equipped with a 2-lamp fixture, 120V, 60 hz., T12 ballast and two (2) high output lamps. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment.

Shipping
Vertical Flow Clean Benches are fully assembled with the SAM unit packaged separately for safe shipping. The self contained SAM unit is easily installed in the frame on site with no special tools required.

Options
See a following page for options and ordering information.

Ordering Information
Sit-down Style Vertical Flow and Work Surface 30” from Floor w/Lights
Model No.NominalWork SurfaceOverall Dim.Opening SizeVoltage
132002 Ft.24″ x 25″26”L x 26”D x 78”H24”L x 30”H115V
132014 Ft.48″ x 25″50”L x 26”D x 78”H48”L x 30”H115V
132024 Ft.48″ x 32″50”L x 33”D x 78”H48”L x 30”H115V
132036 Ft.72″ x 25″74”L x 26”D x 78”H72”L x 30”H115V
132046 Ft.72″ x 32″74”L x 33”D x 78”H72”L x 30”H115V
132058 Ft.96″ x 25″98”L x 26”D x 78”H96”L x 30”H115V
132068 Ft.96″ x 32″98”L x 33”D x 78”H96”L x 30”H115V

NOTE: Fluorescent light tubes not included

Ordering Information
Stand-up Style Vertical Flow and Work Surface 40” from Floor w/Lights
Model No.NominalWork SurfaceOverall Dim.Opening SizeVoltage
132572 Ft.24″ x 25″26”L x 26”D x 88”H24”L x 30”H115V
132074 Ft.48″ x 25″50”L x 26”D x 88”H48”L x 30”H115V
132084 Ft.48″ x 32″50”L x 33”D x 88”H48”L x 30”H115V
132096 Ft.72″ x 25″74”L x 26”D x 88”H72”L x 30”H115V
132106 Ft.72″ x 32″74”L x 33”D x 88”H72”L x 30”H115V
132118 Ft.96″ x 25″98”L x 26”D x 88”H96”L x 30”H115V
132128 Ft.96″ x 32″98”L x 33”D x 88”H96”L x 30”H115V

NOTE: Fluorescent light tubes not included

Options
208-230V, 50/60 hz motorCasters with brakesESD Acrylic side & back panels
277V, 60 hz motorDuplex electrical outletsESD work surface
250V, 50 hz lighting for export modelsFront Face ShieldsStainless steel work surface
Duct Collar Adaptor, 10” or 12” diameterMagnehelic GageStatic Control Package
ULPA Filter 99.9995% eff. @ 0.12 micron or largerPerforated work surfaceSeparate switch for fan & lights

Refer to following pages for more options