SAM® MicroSound GS LI (with Lights)

SAM® Units & Accessories / Variable speed

SAM® MicroSound GS LI (with Lights)

SAM® MicroSound GS LI (with Lights)

Key Features


  • Gel seal style HEPA or ULPA filter
  • Replaceable from roomside


GS Style Filter Data

The HEPA Filter is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger.

An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters are replaceable from roomside.

Standard Ceiling Size

All 2’ x 4’ models are designed to fit a nominal 2’ x 4’ ceiling grid with a 22.5” x 46.5” standard opening.

Air Flow

Airflow ranges from 340 to 850 CFM for a 2 x 4 unit and 220 to 340 CFM for a 2 x 2 unit. At 90 FPM, CFM is nominal 510 on a 2 x 4 and 220 on a 2 x 2 unit respectively. Airflow for units running at 50 Hz will be about 20% less.

Sound Level

At average face velocity of 90 FPM measured 30” from face of filter, sound level is approximately 54 dba with less than 62 dba ambient sound level. Field conditions, voltage and method of testing could produce different results.


SAM MicroSound GS LI (with Lights) Fan Filter Units are ideal for pharmaceutical companies, manufacturers of medical devices and companies in highly regulated industries. The SAM GS LI units feature a gel channel on the upstream side of the final filter which provides a leak-free seal between the filter and the housing.

SAM MicroSound GS units feature a HEPA or ULPA filter replaceable from roomside while the filter housing remains in place.

Housings are fabricated from steel with a white powder-coat finish and include seismic clip suspension points.

The energy efficient N310 Motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115V (60 Hz), 208-230V (50/60 Hz) and 277V (60 Hz).

SAM MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned.

Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% efficiency and an ULPA grade 99.9995% efficneicy Filter is available as an option.

An acrylic eggcrate grille in an anodized aluminum frame is hinged to open, permitting removal of the filter without removing the unit from the ceiling.

The integral light fixture and T8 electronic ballast is located inside the filter housing below the final HEPA filter. This permits fluorescent light bulbs or ballast to be replaced easily from the roomside. A separate j-box for the lights permits various switching options.

Other popular options include an 8’ power cord, (115 Volt only) 99.9995% efficiency ULPA grade final filter, UL 900 filters and duct collar adapters. Refer to the back of this section for more options and accessories.

For horizontal flow applications consult with one of our cleanroom experts in your area, or call the factory for more information.

SAM is a registered trademark owned by Clean Rooms International Inc.


Technical Drawings

Technical Drawings

Typical MicroSound GS LI Model

SAM® 23 and SAM® 23 MicroSound GS LI

SAM® 24's swing down grille allows easy access to filter

SAM® 23 MS GS LI

SAM® 22 MS GS LI

SAM® 22 MS GS LI exploded view

Filter clamp detail

Exploded view


Product Models

Mfg. code

Model or Description

Style

Size

Voltage

Motor

Variable Speed Control

HEPA filter

Weight

12808

SAM 22 MS GS LI

GS LI

2 x 2

115

N310

703084

302201

68 lbs. (30.8kg)

12809

SAM 22 MS GS LI

GS LI

2 x 2

277

N310

703912

302201

68 lbs. (30.8kg)

12810

SAM 23 MS GS LI

GS LI

2 x 3

115

N310

703915

302214

87 lbs. (39.5kg)

12811

SAM 23 MS GS LI

GS LI

2 x 3

277

N310

703984

302214

87 lbs. (39.5kg)

12812

SAM 24 MS GS LI

GS LI

2 x 4

115

N310

7036915

302200

106 lbs. (48.1kg)

12813

SAM 24 MS GS LI

GS LI

2 x 4

277

N310

703084

302200

106 lbs. (48.1kg)

12814

SAM 24 MS GS LI

GS LI

2 x 4

208~230

N310

703912

302200

106 lbs. (48.1kg)


Mfg. code

Model or Description

302201

2 x 2 GS Style HEPA Filter, 99.99% efficiency

302204

2 x 2 GS Style ULPA Filter, 99.9995% efficiency @ MPPS

302214

2 x 3 GS Style HEPA Filter, 99.99% efficiency

302215

2 x 3 GS Style ULPA Filter, 99.9995% efficiency @ MPPS

302200

2 x 4 GS Style HEPA Filter, 99.99% efficiency

302203

2 x 4 GS Style ULPA Filter, 99.9995% efficiency @ MPPS

302190

Prefilter 20″x20″x1″, 30% ASHRAE efficient, pleated type


Motor

Voltage

Hz

Watts

Running amps

N310

115

60

185

1.7

N310

208~230

50/60

170

1.2-1.7*

N310

277

60

165

0.7

 

*Running amps will be less on 50Hz
**Line voltage can affect actual start-up amperage


Final Filters:

  • 302204 2 x 2 GS ULPA Filter 99.9995% efficiency
  • 302214 2 x 3 GS ULPA Filter 99.9995% efficiency
  • 302203 2 x 4 GS ULPA Filter 99.9995% efficiency
  • 308011 2 x 2 GS HEPA UL 900
  • 308010 2 x 4 GS HEPA UL 900
  • 308012 2 x 4 GS ULPA UL 900
  • 308013 2 x 2 GS ULPA UL 900

Prefilters:

  • 302197 Extended Life Prefilter 20” x 20” x 2

Duct Collar Adapters:

  • 19950 10” Duct Collar Adapter
  • 19951 12” Duct Collar Adapter
  • 19952 Side Load with 10” Duct Collar
  • 19953 Side Load with 12” Duct Collar
  • 19955 10” Top Load Duct Collar Adapter
  • 19956 12” Top Load Duct Collar Adapter

Grilles 1/8” Round Perforated: (40% open area)

  • 19506 2 x 2 CRF Anodized Aluminum Grille and Frame
  • 19507 2 x 4 CRF Anodized Aluminum Grille and Frame
  • 19508 2 x 2 CRF Round Perforated with 1/8” Holes, White
    Powdercoated Grille and Frame
  • 19509 2 x 4 CRF Round Perforated with 1/8” Holes, White
    Powdercoated Grille and Frame
  • 19511 2 x 4 CRF S.S. Rnd. Perforated Grille with Anodized
    Aluminum Frame
  • 19512 2 x 2 CRF S.S. Rnd. Perforated Grille with Anodized
    Aluminum Frame
  • 19514 2 x 4 CRF S.S. Perf Grille with S.S Frame
  • Popular Options: (Please choose from the following part numbers when ordering options)

Air Conditioning Mixing Box:

  • 19958 Slanted Top with 10” Duct Collar
  • 19959 Slanted Top with 12” Duct Collar
  • 19947 Square with (2) 10” Duct Collars
  • 19948 Square with (2) 12” Duct Collars

Roomside Variable Speed Control:

  • 19933 CRF Style 110-120 Volt
  • 19934 CRF Style 208-230 Volt
  • 19935 CRF Style 277 Volt

Pilot Light:

  • 19702 GS/CRF Style Red Pilot Light – factory mounted in grille frame (Light Indicates Power to Motor)
  • 19703 GS/CRF Style Red Pilot Light with Pressure Switch – factory mounted in grille frame (Light Indicates Air Flow)

Miscellaneous:

  • 703902 8’ Power Cord 110-120V Only
  • 603322 Gasket on Downstream Edge of Unit—ship loose
  • Magnehelic Gage: Refer to the back of this section
  • Static Control: Refer to the back of this section



Related products (10)

Related products (10)

Roomside Speed Control, Aerosol Port & Static Control

Pilot Light, Power Cord & Prefilter

Grilles & Knife Edge

Final Filters

Duct Collar Adapter

Sheet Rock Adapters & Ceiling Collars

Magnehelic Gauges

SAM® MicroSound GS

SAM® MicroSound 3S GS

SAMLink Control System

Clean Rooms International, Inc

4939 Starr St SE
Grand Rapids, MI 49546

Terms and conditions

Contact us

Toll-free: 877–380–1860

Phone: 616–452–8700

Fax: 616–452–2372

Email: sales@cleanroomsint.com

Terms and conditions

©2021 Clean Rooms International, Inc