SAM RSRM

Return to SAM OVERVIEW Page

Features HEPA Filter and Motor
Replaceable from Roomside

An eggcrate grille in an anodized aluminum frame is hinged to open, permitting removal of the filter and motor blower assembly without removing the unit from the ceiling.

Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards.

The SAM RSRM units feature a gel channel on the upstream side of the final filter which provides a leak-free seal between the filter and the housing.

The energy efficient N310 motor blower assembly is a low watt backward curved impeller, single phase, permanent split capacitor type motor with thermal overload protection.

RSRM units are equipped with a convenient roomside variable speed control with RFI suppression.

* Fluorescent lamp tubes not included.

1. Running amps will be less on 50Hz
2. Line voltage can affect actual start-up amperage

Note: Consult with the factory for horizontal flow applications

HEPA Filter Data: HEPA Filters with upstream gel channel are designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% @ 0.3 micron or larger. An access port with removable plug is located in the center of the filter element face for introducing an upstream challenge or measuring static pressure.

[Click here for a PDF of this content.]