CleanRooms InternationalCleanRooms International

General Information
A self contained SAM Fan Filter Unit provides Class 100 HEPA filtered air in a horizontal laminar flow pattern within the workspace.

Electrical
Standard voltage is 115 volts with other voltage options available. Separate On/Off switches for the fan and lights are located above the workspace. All 115 volt models are equipped with a 8 foot power cord and 3 – prong plug. Other voltages require electrical connection to the power source by a qualified electrician.

Final Filter
HEPA filters are 99.99% efficient @ 0.3 micron or larger with anodized  aluminum frame. ULPA grade filters are 99.9995% efficient @ 0.12 micron, and are available as an option.

Prefilter
A pleated type, disposable prefilter rated at 30% ASHRAE efficiency is standard.

Speed Control
A solid state variable speed control is mounted on the SAM unit.

Grille
Horizontal flow clean benches have a polystyrene grille inserted in an anodized aluminum frame which is hinged to open. This permits removal of the HEPA filter without removing the SAM unit from the frame.

Construction
Clean Bench frames are white painted steel tubing with clear acrylic side panels and adjustable leg levelers. Work surfaces are solid core with white high pressure laminate finish.  ESD, perforated and stainless steel work surfaces are available as options. Clean Bench models are available in a sit-down style with work surface 30” from floor or stand-up style with work surface 40” from floor.

Lighting
All horizontal flow models with lights are equipped with a 4-lamp light fixture, 120 volt, 60 hz with T8, 32W electronic ballast. Fluorescent light tubes are not furnished with the units because of potential breakage during shipment.

Shipping
Horizontal Flow Clean Benches are fully assembled.

Options
See a following page for options and ordering information.

Ordering Information
Sit-down Style Horizontal Flow w/Lights and Work Surface 30” from Floor
Model No.VoltageNominalWork SurfaceOverall Dim.Opening SizeWeight
13255115V2 Ft.24″ x 25″26”L x 44”D x 66”H24”L x 30”H275 lbs.
13243115V4 Ft.48″ x 25″50”L x 44”D x 66”H48”L x 30”H360 lbs.
13244115V4 Ft.48″ x 32″50”L x 51”D x 66”H48”L x 30”H375 lbs.
13245115V6 Ft.72″ x 25″74”L x 44”D x 66”H72”L x 30”H490 lbs.
13246115V6 Ft.72″ x 32″74”L x 51”D x 66”H72”L x 30”H505 lbs.
13247115V8 Ft.96″ x 25″98”L x 44”D x 66”H96”L x 30”H630 lbs.
13248115V8 Ft.96″ x 32″98”L x 51”D x 66”H96”L x 30”H650 lbs.

NOTE: Fluorescent light tubes not included

Ordering Information
Stand-up Style Horizontal Flow w/Lights and Work Surface 40” from Floor
Model No.VoltageNominalWork SurfaceOverall Dim.Opening SizeWeight
13256115V2 Ft.24″ x 25″26”L x 44”D x 76”H24”L x 30”H240 lbs.
13249115V4 Ft.48″ x 25″50”L x 44”D x 76”H48”L x 30”H390 lbs.
13250115V4 Ft.48″ x 32″50”L x 51”D x 76”H48”L x 30”H410 lbs.
13251115V6 Ft.72″ x 25″74”L x 44”D x 76”H72”L x 30”H515 lbs.
13252115V6 Ft.72″ x 32″74”L x 51”D x 76”H72”L x 30”H530 lbs.
13253115V8 Ft.96″ x 25″98”L x 44”D x 76”H96”L x 30”H700 lbs.
13254115V8 Ft.96″ x 32″98”L x 51”D x 76”H96”L x 30”H730 lbs.

NOTE: Fluorescent light tubes not included

Options
208-230V, 50/60 hz motorCasters with brakesESD Acrylic side & back panels
277V, 60 hz motorDuplex electrical outletsESD work surface
250V, 50 hz lighting for export modelsFront Face ShieldsStainless steel work surface
Duct Collar Adaptor, 10” or 12” diameterMagnehelic GageStatic Control Package
ULPA Filter 99.9995% eff. @ 0.12 micron or largerPerforated work surface

Refer to following pages for more options